Stainless Steel A240 310 Sheet Plate, SS 310 A240 Sheet Plate Supplier in India

.

SS Stainless Steel 310/310S Flanges	SS Stainless Steel Astm 310 Pipe Fittings
SS 310/310S Fasteners	SS 310/310S Pipes / Tubes
SS 310/310S Sheets, Plates and Coils	SS 310/310S Round Bar,   Wire

 

Lanco Pipes & Fittings Co. is one of the leading exporter and supplier of SS 310 / 310S Sheets, Plates and Coils, Pipes, Bars, Tubes, Flanges, Etc. ( Specialized for Heat exchanger, Furnance, Chemical , Oil and Gas, Fabricators, Paper and Pulp, Food processing Industry etc. )

SS 310/310S Sheets, Plates and Coils

SS 310 / 310S Sheet / Sheet

SS 310 / 310S Coil

SS 310 / 310S Plates / Plate

Specifications:
Standards	Designation
ASTM	A240
ASME	SA 240
Stock
Range 1 MM TO 200 MM THK Sizes 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.

We also supply make of SAIL / ESSAR / JINDAL / TATA / BHUSHAN/ INDIAN / IMPORTED etc material.

Sr. No.	Size (in mm)	Thickness	Specification	Manufacturer
1	1000 x 2000  1220 x 2440  (4' x 8') 1250 x 2500  1500 x 3000 To 6000  2000 x 4000 To 6000	0.3 mm To 120 mm	A - 240	Jindal Sail Shah Alloys  Imported Etc.

Specifications

Standards Designation ASTM A 240 ASME SA 240

 

STANDARD	UNS	WERKSTOFF NR.
SS 310	S31000	1.4841
SS 310S	S31008	1.4845

 

Composition

Typical compositional ranges for grade 310 stainless steels are given in table 1.

Composition ranges for 310 grade stainless steel Sheets & Plates

Grade C Mn Si P S Cr Mo Ni N 310 min. max. - 0.25 - 2.00 - 1.50 - 0.045 - 0.030 24.0 26.0 - 19.0 22.0 - 310S min. max. - 0.08 - 2.00 - 1.50 - 0.045 - 0.030 24.0 26.0 - 19.0 22.0 -

 

Mechanical Properties

Typical mechanical properties for grade 310 stainless steels are given in table 2.

Mechanical properties of 310 grade stainless steel Plates & Sheets

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness Rockwell B (HR B) max Brinell (HB) max 310 515 205 40 95 217 310S 515 205 40 95 217

Physical Properties

Typical physical properties for annealed grade 310 stainless steels are given in table 3.

Physical properties of 310 grade stainless steel in the annealed condition

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (μm/m/°C) Thermal Conductivity(W/m.K) Specific Heat 0-100°C (J/kg.K) Electrical Resistivity (nΩ.m) 0-100°C 0-315°C 0-538°C at 100°C at 500°C 310/S 7750 200 15.9 16.2 17.0 14.2 18.7 500 720

Grade Specification Comparison

Approximate grade comparisons for 310 stainless steels are given in table 4.

Grade specifications for 310 grade stainless steel

Grade UNS No Old British Euronorm Swedish SS Japanese JIS BS En No Name 310 S31000 310S24 - 1.4840 X15CrNi25-20 - SUH 310 310S S31008 310S16 - 1.4845 X8CrNi25-21 2361 SUS 310S

These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Possible Alternative Grades

Possible alternative grades to grade 310 stainless steels are given in table 5.

Possible alternative grades to 310 grade stainless steel

Grade Why it might be chosen instead of 310 3CR12 Heat resistance is needed, but only to about 600°C. 304H Heat resistance is needed, but only to about 800°C. 321 Heat resistance is needed, but only to about 900°C. Subsequent aqueous corrosion resistance also required. 253MA (2111HTR) A slightly higher temperature resistance is needed than can be provided by 310. Better resistance to reducing sulphide atmosphere needed. Higher immunity from sigma phase embrittlement is required.

OTHER GRADES OF STAINLESS STEEL 310 / 310S SHEETS PLATES

Stainless Steel 310 Sheets Plates	Stainless Steel UNS S31000 Sheets Plates
Stainless Steel 310S Sheets Plates	SS UNS S31008 Sheets Plates
SS 310 Sheets Plates	Stainless Steel Din 1.4841 Sheets Plates
SS 310S Sheets Plates	SS Din 1.4845 Sheets Plates

 

.

 

.

SS Stainless Steel 310/310S Flanges	SS Stainless Steel Astm 310 Pipe Fittings
SS 310/310S Fasteners	SS 310/310S Pipes / Tubes
SS 310/310S Sheets, Plates and Coils	SS 310/310S Round Bar,   Wire

Professional Stainless Steel 310 Sheets Plates Manufacture, A National Class Production Base

.

Types of Sheet / Plates

Stainless Steel 310 Sheets Plates

Stainless Steel 310S Sheets Plates

SS 310 Sheets Plates

SS 310S Sheets Plates

Stainless Steel UNS S31000 Sheets Plates

SS UNS S31008 Sheets Plates

Stainless Steel Din 1.4841 Sheets Plates

SS Din 1.4845 Sheets Plates